Jump to content

azlambo

Multi-Lambo Owner
  • Posts

    523
  • Joined

  • Last visited

Contact Methods

  • Website URL
    http://freewebs.com/azlamboclub
  • ICQ
    0

Profile Information

  • Gender
    Male
  • Location
    Phoenix, AZ

Recent Profile Visitors

4,588 profile views
  1. Looks like the "confirmed" double clutch in the Aventador isn't going to happen.
  2. I believe that the light in the front "trunk" operates off of one of the two door switches for each door.
  3. Well, the front bumper is re-sprayed, along with new turn signal/parking light lenses and new fog lights. Looking good!
  4. "Massive inventory"? Some of the 31 cars on DuPont are listed 2 and 3 times. Anyway, if any interest, PM me. Will probably keep the car. Would be difficult to replace with the same quality car. A lot of questionably-maintained Diablos out there. Just wanting to try out another Lambo.....either Aventador or Huracan.
  5. Toying with the idea of selling my '99 Diablo VT coupe. I've owned this car for many years. Have kept the car maintained. Currently am having the front bumper resprayed and clear bra'd to take care of miscellaneous small rock chips that have accumulated over the years. All components work as they should. Recently had front driver's side shock replaced along with Koni ECU. Had cats replaced with "test pipes", but still have cats. Stock tail pipes. Every thing else is stock. Not cheap. Only 23 '99 VT Coupes made. Lambo of Sarasota FL has a yellow one, which they have priced at $375,000.00 currently. I will take less than that.
  6. '94 had power steering, all wheel drive, revised dash....probably other changes over '91-'93.
  7. As I state, it depends on which plug you have. I've seen different plugs.
  8. I am the source for the filter wrench. [email protected] Also, some instructions come with the wrench. Jeff
  9. Kevin, As you know, I can do the "SV" for him! http://www.lambopower.com/forum/index.php?...c=66352&hl=
  10. Please get photos during the install! Want to see the hydraulic hook up to the front shocks as well as electronic hook ups to all shocks.
  11. I take it that you will cap off the hydraulic feeds to the front shocks, and disconnect all electronic wires to the new shocks?
  12. The shock was rebuilt with new seals for the hydraulics. Unfortunately, the electronics in it were bad.
  13. Problem solved! The newly rebuilt shock had bad electronics! Replaced the shock again, all is well! 👍
×
×
  • Create New...