Kipper Report post Posted August 16, 2009 Hi Members, I have read in previous posts that you can deactivate the function of having to press the key fob after a short time before you can start your car, I understand that if you turn on & off the ignition key 10 times and then press the fob 17 times it will deactivate this function. However before I do this I want to be sure that I will not accidently cause myself an issue that i cannot reverse, can some one please explain or confirm the following points: What will happen if I make a mistake and miss count the button presses or ignition key turns? When turning the Key on & off 10 times do you have to do this fast,slow or withinn a particular time? Including the Fob Are the functions displayed anywhere on the dash ect or do you just press and prey? how do you know if you are in programming mode? Can doing the above go wrong in any way that will prevent me from deactivating the alarm system? Your confirmation of the above would be greatly appreciated What happens if this process happens to go pear shaped??? Quote Share this post Link to post Share on other sites More sharing options...
topcabron Report post Posted August 16, 2009 if you do it too fast, your car will blow up. what is pear shaped? Quote Share this post Link to post Share on other sites More sharing options...
Kipper Report post Posted August 16, 2009 if you do it too fast, your car will blow up. what is pear shaped? Wow are you serious???? lucky I waited?? Pear shaped is when things dont go smoothly, straight, Quote Share this post Link to post Share on other sites More sharing options...
jefflambo Report post Posted August 16, 2009 Turn the key off and on at a normal rate not to fast or to slow. If you do the on/off right the alarm will respond and the led light will flash. when you press the fob button the led will flash with each push. If you enter wrong # it may turn off or on a different funtion. Without my book for alarm in front of me I dont recall which dose what. Good luck. Quote Share this post Link to post Share on other sites More sharing options...
Kipper Report post Posted August 17, 2009 Turn the key off and on at a normal rate not to fast or to slow. If you do the on/off right the alarm will respond and the led light will flash. when you press the fob button the led will flash with each push. If you enter wrong # it may turn off or on a different funtion. Without my book for alarm in front of me I dont recall which dose what. Good luck. Thanks Jeff, I now have the Med2000.K installer booklet and am ready to give it a go, I am just concerned about shutting the system down and not being able to get the system / car going again? I have spoken to the Local dealer and apparently I can order additional Fob's that are enabled but i will have to install them. The book appears to explain a procedure where you actually dump all programmed Fob's and you reinstall the ones you have, this must be their way of deleting lost Fob's. have you had any experience with this yourself? again i am concerned about locking myself out of the system. Your comments are appreciated Quote Share this post Link to post Share on other sites More sharing options...
4xchamp Report post Posted August 18, 2009 I disabled the alarm on my 06 however the door locking function through the key fob also became innoperable , so I reactivated the alarm . I do have the Med instructions that came with my car and would fax them to you if you need them . Quote Share this post Link to post Share on other sites More sharing options...
SPEEDsenzAZN Report post Posted August 7, 2017 I disabled the alarm on my 06 however the door locking function through the key fob also became innoperable , so I reactivated the alarm . I do have the Med instructions that came with my car and would fax them to you if you need them . Could you post the MED instructions here instead here in the forum instead? I would like to disable the alarm system as it is more problems than its worth. Quote Share this post Link to post Share on other sites More sharing options...
tpamurci Report post Posted August 22, 2017 Could you post the MED instructions here instead here in the forum instead? I would like to disable the alarm system as it is more problems than its worth. Here's a google drive link with the manuals: https://drive.google.com/drive/folders/0B6n...WDQ?usp=sharing Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.