Jump to content

ExoticCarDriver

Lambo Owner
  • Posts

    175
  • Joined

  • Last visited

Contact Methods

  • Website URL
    http://
  • ICQ
    0

Profile Information

  • Gender
    Male
  • Location
    Houston TX
  • Interests
    Billiards, Fast Cars, Hot Women!!
  1. I have pondered an idea that the clutch wear can be read without the Lambo computer but was wondering first if someone can explain the sequence of events that occur when the E-Gear snap shot is initiated from the Lambo computer i.e. does the E-Gear actuator do anything to the clutch, etc.
  2. Hi. I am showing the OBD fault code for the crankshaft position sensor is P0336. I am just curious was a check engine light displayed for this code? Was the fault diagnosed via an OBD II reader?
  3. Because it sat for 6 months, I wonder has the fuel gummed up and prevented the fuel gauge from working properly?
  4. Do you have any updates on the egear issue?
  5. I had the clicking noise before. It turned out to be the plastic piece that holds the cooling brake hose to the frame of the car. Mine was cracked and was coming off its mounting area on the frame of the car causing a clicking noise when I turned the steering wheel. Might be worth a check to see.
  6. I've seen this Murci in Houston before as well as met the owner to. Definitely one of the loudest Murcis I've ever heard..lol.
  7. Could someone explain in detail how the 2wd conversion and sun gear failures are connected?
  8. I bought some locally from a local performance shop. Sorry but I forgot the size. They are like the ones below.
  9. I replaced my primary cats with straight pipes a while back and went with v-band clamps vice the OEM clamps. Its nearly impossible to reinstall the OEM clamps as there isn't enough room in there as you will find yourself working with one hand. So yes the v-band clamps are easier. For removing the bolting on the clamps, I went with a small pass through type ratchet/socket. Once you get the clamps loose you should be able to rotate the straight pipe some to easily access the sensors.
  10. Do you have any specifics on testing the switch?
  11. The door lock seems to be working. Does anyone else have any other ideas?
  12. I have a 2006 Murci roadster and the driver's side window has stop auto dipping (when in fully up position) from the door latch on the inside and outside of the car. Does anyone know what I can do to start troubleshooting this?
×
×
  • Create New...