Jump to content

Where to locate Relay/Fuse Box (LP560-4)


dab0ssmayne
 Share

Recommended Posts

Hello, So I've been having problems with my E-Gear flashing after every 3-5 miles are so on a 2009 LP560-4. I scanned and cleared the code (CODE: 02372 - PASSIVE/SPORADIC - HYDRAULIC PRESSURE UNIT LOSS OF PRESSURE), but it would still come up when I'm in 1st or 2nd gear. I was wondering where can I find the Relay/Fuse box to check the E-Gear relay? I've read on a couple of forums and people said to look behind the passenger seat, but I don't see anything. (See https://postimg.org/image/rf2a7ysxp/ for picture)

 

Thanks

Share this post


Link to post
Share on other sites

Quite sure it's friction mounted at both ends so it just lifts up with some pull at the left & right end. There is a guiding piece at each end also (don't know how to describe it properly but it should be obvious once the panel is removed) so putting the panel back in requires some careful alignment. Once aligned, just push down on the panel to secure it.

Share this post


Link to post
Share on other sites

Quite sure it's friction mounted at both ends so it just lifts up with some pull at the left & right end. There is a guiding piece at each end also (don't know how to describe it properly but it should be obvious once the panel is removed) so putting the panel back in requires some careful alignment. Once aligned, just push down on the panel to secure it.

 

 

Great! Thanks. Got it lifted up and removd. Another question would be, Which relay would it be for the E-Gear? (See https://postimg.org/image/lucis4rlf/ for pic of Relay Box

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...