Fabspeed_Motorsport

Awesome, can't wait to see the outcome!

Hated to see her go but I loved listening to her leave!

Unfortunately, we did not get the chance to. Although I did hold both and they are very similar.

A photo shoot that puts an entirely different perspective on “Black and Yellow”. Canadian Photographer, Mike Boldt, was able to capture an impressive collection of luxurious toy’s inside a private Northern airport hangar. Situated alongside two brand new color matched R44 Raven II and R66 Turbine helicopters, sits both a Lamborghini Murcielago LP640 and a Lamborghini Gallardo LP540 outfitted with Brixton Forged wheels. Check out their full line of monoblock, 2 piece, and 3 piece wheels here The Collection Shoot me a PM or email me at [email protected] if you're interested, I would be more than happy to assist! Lamborghini Murcielago LP640: Brixton M51 Monaco Series Matte Firecracker Black outer / High Luster Candy Black face (19.0″ x 8.5″ front / 20.0″ x 13.0″ rear) Lamborghini Gallardo: Brixton R10 Targa Series Matte Firecracker Black face / Snow White outer / Matte Firecracker Black exposed hardware (20.0″ x 8.5″ front / 20.0″ x 11.0″ rear)

A photo shoot that puts an entirely different perspective on “Black and Yellow”. Canadian Photographer, Mike Boldt, was able to capture an impressive collection of luxurious toy’s inside a private Northern airport hangar. Situated alongside two brand new color matched R44 Raven II and R66 Turbine helicopters, sits both a Lamborghini Murcielago LP640 and a Lamborghini Gallardo LP540 outfitted with Brixton Forged wheels. Check out their full line of monoblock, 2 piece, and 3 piece wheels here The Collection Shoot me a PM or email me at [email protected] if you're interested, I would be more than happy to assist! Lamborghini Murcielago LP640: Brixton M51 Monaco Series Matte Firecracker Black outer / High Luster Candy Black face (19.0″ x 8.5″ front / 20.0″ x 13.0″ rear) Lamborghini Gallardo: Brixton R10 Targa Series Matte Firecracker Black face / Snow White outer / Matte Firecracker Black exposed hardware (20.0″ x 8.5″ front / 20.0″ x 11.0″ rear)

About six months ago, Fabspeed Motorsport embarked upon one of the biggest builds that we have taken on to-date: to build the first and only Novitec N-Largo widebody California T in North America. The car arrived to us as a fully stock California T in sparkling Rosso California. The first stage was to install the Fabspeed Valvetronic Exhaust System and tune the ECU to unleash the full power potential of the twin turbo V8. We raised the peak horsepower from 499whp to 560whp, with consistent gains of over 125whp in the mid range! With the California now packing a serious punch, it was time to begin the Novitec N-Largo body work. After meeting with a number of local body shops, we partnered with SG Paint Worx in Lansdale, PA to tackle the project. Shaun and his team did an absolutely phenomenal job, putting in a staggering amount of hours getting each and every panel lined up perfectly before hand-molding everything into the body and spraying it all with a fresh coat of Rosso California. When all the work was complete, the paint looked even better than it had when it rolled off the ship from Italy. When SG Paint Worx was completed with the car, we finished up by installing a full clear protective bra over the entire body. The end result was nothing short of jaw-dropping. Now a full 11 inches wider than a standard California T, this N-Largo has a presence that is simply unmatched. Even seasoned Ferrari enthusiasts have asked us if it was a special edition F12! Without further ado... the only Novitec N-Largo California T in North America, built by Fabspeed Motorsport and SG Paint Worx!

All completed, waiting on some videos! Picked up some great power throughout the RPM range see dyno below I also added some beauty shots in here too 3000 RPM:+14.6whp / +25.7 ft/lbs 5600 RPM: +25.0whp / +24.0 ft/lbs 7600 RPM: +18.1whp / +12.5

I should have the end dyno results to post later today! Below is the stock runs. Stock Power: Run 0: 513 hp @ 7.46 RPM / 390 ft/lbs @ 6.29 RPM Run 1: 516 hp @ 7.52 RPM / 391 ft/lbs @ 6.27 RPM

Installation and tuning was on the agenda today. She's buttoned up and ready to be tested on the dyno tomorrow morning!

***UPDATE*** This morning we had the luxury of getting this beast on the dyno to see what she is putting down stock. Immediately after we got right to it firstly showing off the new system then removing the rear bumper to start the installation process! Stay tuned!

This week we kicked off a project on a car that we're very excited ot have here in the shop, a Lamborghini Gallardo LP570-4 Squadra Corse. It is one of the most limited-production Gallardos in the world. Of the 50 units that they made worldwide, there are 18 in North America and only 15 of those are in the US. They are all E-Gear and all Giallo Midas and LOADED with carbon fiber accents. It is absolutely gorgeous and we have the luxury of transforming it into the raging bull it really is! This car will be getting our Valvetronic X-Pipe Exhaust System, BMC Replacement Air Filters, and a custom in-house dyno ECU tune. I will be updating this thread over the next few days as the build progresses, so stay tuned! In the meantime, take a look at some photos we captured upon its arrival; lots more to come! Gallardo LP - Product Line

Thank you! We take a lot of pride in our products and our welders are top notch. I just wish I could weld like that!

We just had 5 of these bad boys pass through the fabrication list for customer orders! We got a change to take a few beauty shots so I thought I would share! These will fit all 04-08 Gallardo's and are hand tig welded in our facility outside Philadelphia. Deluxe Quad Style Tips - Product Link Let me know if anyone is interested, or if you have any questions! PM me for special forum pricing!

Wow, impressive. The F Type is surprisingly one of my favorite cars considering we don't offer anything for them. They just sound so damn good! Anyway, congrats on the new addition!

Here is a video from Troy Sowers of him installing our Extended Shift Paddles:

+1 on the Walther, I've said it before and I'll say it again I love both of mine. I have a PPQ M1 full size and I carry a PPS they are fantastic. I have not had the opportunity to shoot a CCP but I'd be interested if someone were to do a comparison.

I have to say that car is gorgeous. For anyone out there that is still looking for an exhaust, I'll just leave this here Please let me know if you have any questions! Supersport X-Pipe Valved Exhaust System - Product Link

Unfortunately as of right now we do not. It is absolutely something I can bring up in our next R&D meeting, I will keep you updated.

Unfortunately as of right now we do not. It is absolutely something I can bring up in our next R&D meeting, I will keep you updated.

Done! I hope to hear from you soon!

@fabspeed_motorsport We keep it interesting and create videos specifically for Instagram.

PM sent!

Thank you! We're able to customize the signs as you see fit, and even create custom, original signs! Just let us know what you want.

Quite a few crazy gifts! Fabspeed sign takes the cake though!

Michelin PSS is the way to go! My customers that have dealt with them have had nothing but good things to say about them! They are still even hard to find but let me know if you're looking for a set and I'll see what I can track down.