Jump to content

Instrument Cluster Removal with pics


Recommended Posts

Replacing one of the buttons on the bottom of the instrument cluster. 2004 Murcielago

1. Remove surround of the steering column. 8 philips head screws from the bottom. Consisting of 4 screws near the middle that attaches to steering column. Then 2 screws each side that attach to too piece of the surround.

E988373D-EB98-4042-B6B1-ACFA081D5B97.jpeg

Share this post


Link to post
Share on other sites

2. There is a thumb wheel on each side that holds the front of the instrument cluster to the dash. The rear of the cluster has an extension that holds it down. If you look at the two buttons on the bottom of the instrument cluster on each side, the bolt is located between them and towards the front a little. This is a pic of the thumb wheel so you can locate it.

90AA5B1A-ABE7-4CBA-8A65-41439057B166.jpeg

Share this post


Link to post
Share on other sites

3. Lift front of the instrument cluster up to get the bolts out of the holes then pull towards yourself to clear extension of rear of instrument cluster from dash.

4. Pics of the buttons, They are held in by 2 small philips head screws each. You can see the bolt that holds the instrument cluster to the dash approximately between the buttons and slightly deeper. They were covered by black tape that was removed for pics.

8DED7305-756E-434E-8DF4-54FC71E8A953.jpeg

FA32D097-9437-4364-8B3F-B3FFC0795647.jpeg

Share this post


Link to post
Share on other sites
  • 1 year later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...