b512m Report post Posted August 16, 2013 Hi, just wondering if anyone have experience changing the fuel pumps and filter on a 6.0 ? What about changing and bleeding the coolant. Any advise or pics would help. I am planning to do it with a few friends, rather than bringing it to a dealer. thanks Quote Share this post Link to post Share on other sites More sharing options...
Chipster Report post Posted August 16, 2013 Not sure if the fuel filters are in the same place as on the early diablos but for us it is in front of the passenger rear wheel. Should be able to look at parts diagrams on Lambo stuff and see where they are. You'll have to look in your manual for the fuel pump relays and fuses and pull all those. Then start up the car and let it runs till it dies to relieve the pressure. Then you just unscrew the connections on the pumps and clamps holding the filters and pumps in. Hook up the new ones and connect the wiring back to the new fuel pumps. Then put the fuses and relays back in and you should be good. Will be messy! Coolant you just drain out of the bottom of each radiator. There are write ups on Lambo web for other model years but it should help. Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.