Vince_1972

I just changed my battery (Monday) and I had the same problem. When you open your Gallardo, the alarm sounds and lights flashing orange. Nothing serious! Simply put the key in the ignition and turn-out and everything will stop. At first, you will have the ESP failure logo, simply roll over and everything is in order.

The coils is changed, the injectors (4 bar instead of 3 bars) and the spark plugs by keeping the same used by vehicles of the Lamborghini races. Just to show the difference, the original Body Throttle is at the back of the picture, the big of the LP 570 was ahead with adaptation of the play we made. You can see the size difference! Some update soon

The project continues. We're redoing the ECU and adapt certain parts to optimize the preparation.

Exhaust "Kline Innovation" ordered

Big thanks, Hannibal

We repeated several dynos. Here the old curve (502 hp/ 512 Nm) : The new, a little better than the last at 540 hp/ 536 Nm (543 hp/ 554 Nm): We made a dyno without filters for fun and we have 550 hp three sets of curves:

Hi, For the diameter of the Throttle Bodyth isn't the same outside diameter as I thought ..., it should be mounted with an adapter because the outside diameter are not the same (74mm -> 82mm). The adapter will be completed Monday. OEM WHP: ~420 HP Mod ECU WHP: ~450 HP Mod ECU without filters WHP: ~460 HP I consider 20% loss

Hello, in fact, 85% have nothing to do with the loss. Only the operating range for power. We begin to 50km / h and stops before the rev. The loss is between 19-21%

Yes, the THROTTLE BODY of the 5.2 L is the same the Audi R8 GT, with a bigger inner diameter The reference number 0f 500/520/530 is 7D133062 The reference number of 550/560/570 is 07L133062F

Throttle Body of the 570 received! I will replace those of my Superleggera that have a smaller diameter. I do not think to have a gain power but on the torque I think the difference will be significant!

It's a 2oo8 Superleggera 53o

I complete the list: http://www.kline-innovation.com/ http://titekusa.com/ http://www.ipe-f1.com/ http://www.fi-exhaust.com/ http://www.fluidmotorunion.com/

You are right when you speak of power to the wheel, that is, without correcting the losses! In Europe, it is rather the power to the engine, transmission losses calculated by the dynamometer as the powers announced by car manufacturers. The Supeleggera 530 is called "530" because it is the engine power it should have the engine (no wheels). But, unfortunately, the Superleggera 530 stock never much more than 500 hp / motor.

Hello, as part of my preparation, I seek a titanium exhaust system with the best performance and valves. Here's what I found: http://www.kline-innovation.com/ -> sound great, but low gain (10-12 hp) (email with the company) http://titekusa.com/ -> sound nice, announced gain: 30HP and 22TQ Gain (found on vividracing) http://www.ipe-f1.com/ -> sound great, I have not found gains announced http://www.fi-exhaust.com/ -> sound great, gains announced 5-10% (email with the company) Thank you very much for your experiences and opinions!

Hello, as part of my preparation, I seek a titanium exhaust system with the best performance and valves. Here's what I found: http://www.kline-innovation.com/ -> sound great, but low gain (10-12 hp) (email with the company) http://titekusa.com/ -> sound nice, announced gain: 30HP and 22TQ Gain (found on vividracing) http://www.ipe-f1.com/ -> sound great, I have not found gains announced http://www.fi-exhaust.com/ -> sound great, gains announced 5-10% (email with the company) Thank you very much for your experiences and opinions!

Thanks for your answer. Do you have a dyno curve? I'ts very important for me to have an idea of the curve. Thanks

Curve after Alientech's work: It is 540hp / 536Nm, a gain of 40hp and 23Nm Alientech did a lot of work! gained 40 hp on atmo, just with programming, it is very strong. It was a big concern for air flow, the engine chokes and filters are super grimey. Alientech has already made a principle of adjustment with a larger air flow (butterflies and air box) for following the preparation.

Here the stock dyno curve made March 18: I was warned that power is around 500 hp, it is 501hp / 512Nm

Hello everyone! I'm new here After mechanical preparation on my Aston Martin Vantage, I start a new project on my Lamborghini Superleggera 530 2008. The pics: For the preparation, i don't want to work with turbo, but stay with a naturally aspirated engine. For me, a Lamborghini isn't a turbo car. After passing on the dyno (stock), we found 502 hp and 512 Nm Here's what I'm going to do it: 1. Changing the mapping completely tailor-made on the dyno (Alientech Italia) 2. Carbon air box (Carbonio or Tecnocraft or other) 3. diameter air intake 4. catalysts 5. silencer 6. ? the goal is to reach around 600 hp and 600 Nm If anyone has any advice for me or help me, I would be very happy Thanks!