ABS Warning light reset???

So for the past couple of days i've been driving my 98 Diablo SV and randomly the ABS light comes on beeps away.. for no reason.

 

Does anyone know how to reset this warning light? It will go off on its own but it comes back on randomly, I think it needs to be rest from the computer to erase the code.

 

Thanks in advance for your help.

 

Russ~

Your brake fluid reservoir is full? If it is a computer thing I'm not sure the OBII scanner can do it?

might be the sensor.

 

To clear the code needs Factory laptop. When its off there is no fault. When the light comes back on it see the fault. System will restart with key turned off and back on if system is working light stays off but code will still be stored. I see the most issues with the rear sensors. I would start with unplugging them clean the connectors and I add Stablant. This solves the issues most of the time. Sometimes it needs a new sensor. Its always a rear for some reason.

To clear the code needs Factory laptop. When its off there is no fault. When the light comes back on it see the fault. System will restart with key turned off and back on if system is working light stays off but code will still be stored. I see the most issues with the rear sensors. I would start with unplugging them clean the connectors and I add Stablant. This solves the issues most of the time. Sometimes it needs a new sensor. Its always a rear for some reason.

 

Thanks for the tip, it was fine for 2 days and came back on today, so it looks like i have a weekend project now.

 

Thanks again~

How did you make out with this?

Mine just did the exact same thing.

How did you make out with this?

Mine just did the exact same thing.

 

Knock on wood it never came back on.