colorinc

agreed! did some maintenance on mine front and rear diff lube change/and air filter... surprising how dirty they were with only 7k miles... seen the post on your pcar mods mine hase 3076's and full protomotive intake intercoolers etc... good stuff

very nice combo... i have the same:)

LOL yeah no kidding!!

just thought i would share this... my diff started to make some noise: slight creaking/moan when you make a turn so picked up some castrol syntec gear lube and 4oz of amsoil sliplock friction modifer and went to work... while i had the car in the air i decided to do the front dif as well (no modifier in the front)... 2 hrs and 15 minutes later i was doing figure 8s in a parking lot .. long story short fresh oil took care of the creaking and moaning the shifts are very smooth.. also remove the filter and cleaned it facts 06 gallardo e-gear 7856 miles front diff fluid looked and felt good rear diff fluid looked dark and felt ok not bad special tools 14mm allen socket front and rear drain plugs 24mm wrench for the front dif fill hole 22mm wrench for the rear diff seep hole tim

good to know mike! how hard was it to get the switch panel out?

hi there have an 06 g with factory backup camera.. is there an adjustment for controlling the brightness contrast? mine is really dark sny help would be great thanks tim

got it... thanks jeff ! autopartswarehouse.com Air Filter AFE Air Filter Gallardo|Base AFE Price: $41.49 Qty: 2.00 Part #: A153010132 Sub Total: $82.98 Discount: $5 Shipping: $0 Handling: $0 Tax: $0 Core: $0 Total: $77.98

i thought that was the problem also.. so tried it with the door open and same thing...

hey want to know if anyone experienced the same thing and how to fix passenger side window rolls down just fine when you go to put it up it comes up an inch then goes back down it does it 3 times then finally rolls up very slowly... any ideas?? tim

anyone have a part # for 06 Gallardo K&N air filter? tx tim _______________

very nice!!

lambo owner status request

you prob can get it in LA... yes you can clear the code... i have no idea if it will come back on but it will tell you what code it is then you can post that on the forum and maybe find the answer from there... the scanner was $200ish... very easy to use it plugs in under the dash to the right of the steering wheel

i had the same issue here is the outline first time i was in stop and go traffic with less than a 1/4 tank of gas(fuel light was on) this is a common issue that can happen the second time i had a full tank of gas but i filled up at a different station and i think that i got a bad tank of fuel or they had switched to the winter blend of fuel(i live in mi) i noticed a ton of water coming out of the tail pipe (more than usual) ran that out filled up at my local station with premium and put 400-500 miles on it and no light i reset the code myself using a actron code scanner from autozone.. no big deal plug it in select audi:) read and clear code... i think the code i have gotten is p1314 tim

i think the airpumps he was referring to were the secondary airpumps used to aid in heating the cats for emissions... the e-gear system is hydraulic tim

hi guys i have gotten the same CEL 3 time now... i clear it out then it comes back a week or so later... its happened on a full tank of gas and close to empty.... the code is as follows: P1314 Functional check Exhaust sensor pressure signal does anyone know the fix to take care of it for good thanks tim

i have an 06 e-gear and experience the same vibration between 2000-2800 rpm...

i use an actron reader when selecting vehicle select european then audi works great tim

here is a great site with a ton of info... also you can clear your own codes using a actron scan tool from autozone(select audi when asked what type of car)or just have the guy at autozone do it.... the obd2 port is located underneath the drivers dash to the right of the steering wheel ... i seen these codes pop up when the gas gets low and your in stop and go traffic tim http://www.lamboweb.com/Repairs_Section/Ga..._A_Gallardo.htm

pm sent