Gallardonera Report post Posted August 6, 2011 Hi everybody. I have a 07 Gallardo Nera ( 85 / 185), currently with 12k miles on it. Car works perfectly and then last week at a stop light, I was in neutral. Light turns green, I go to put it in first and its flashing N and 1. The e-gear fluid level seems to less than the MIN. what shall i do? Add tutellla or i have to bleed the system. PS : I don't have leak. Thanx for your help Quote Share this post Link to post Share on other sites More sharing options...
djantlive Report post Posted August 6, 2011 if it's low, i would add. flushing the fluid requires a lambo computer (unless you want to do the messy manual way) so it's not really needed unless you are changing the clutch. Quote Share this post Link to post Share on other sites More sharing options...
JohnLP560 Report post Posted August 7, 2011 Hi everybody. I have a 07 Gallardo Nera ( 85 / 185), currently with 12k miles on it. Car works perfectly and then last week at a stop light, I was in neutral. Light turns green, I go to put it in first and its flashing N and 1. The e-gear fluid level seems to less than the MIN. what shall i do? Add tutellla or i have to bleed the system. PS : I don't have leak. Thanx for your help Try adding the tutela fluid first. You can buy it from the Lamboparts website. If you buy it at the dealer its 3 times the price. Quote Share this post Link to post Share on other sites More sharing options...
Gallardonera Report post Posted August 7, 2011 Hi I have add tutella and nothing happened. I thing my egear pump is dead. But before buying one i wAnd to verify the relay. Kamal Quote Share this post Link to post Share on other sites More sharing options...
djantlive Report post Posted August 8, 2011 it's probably your relay bubble in fluid actuator pump there are a few threads on this. you may want to have a dealer with lambo computer look into this. Quote Share this post Link to post Share on other sites More sharing options...
rosso spyder Report post Posted October 14, 2011 whats the verdict? Quote Share this post Link to post Share on other sites More sharing options...
deonss Report post Posted October 14, 2011 Hi I have add tutella and nothing happened. I thing my egear pump is dead. But before buying one i wAnd to verify the relay. Kamal Search my threads about the resolution. Quote Share this post Link to post Share on other sites More sharing options...
Swif Report post Posted October 14, 2011 Hi I have add tutella and nothing happened. I thing my egear pump is dead. But before buying one i wAnd to verify the relay. Kamal When you open the door do you hear the bump, if so does it sound strong? If the fluid is low and you have seen that the fluid before was a normal level look for a leak. relay is on the pass side under the rear side panel in the pass compartment. Quote Share this post Link to post Share on other sites More sharing options...
Gallardonera Report post Posted October 15, 2011 When you open the door do you hear the bump, if so does it sound strong? If the fluid is low and you have seen that the fluid before was a normal level look for a leak. relay is on the pass side under the rear side panel in the pass compartment. Hi Yes, when i open the door, i Heard the pump running. It stops after 5 seconds. Can this probleme cause by a wrong actuator? Br Quote Share this post Link to post Share on other sites More sharing options...
Swif Report post Posted October 15, 2011 Hi Yes, when i open the door, i Heard the pump running. It stops after 5 seconds. Can this probleme cause by a wrong actuator? Br Pump should not run long after opening door. just needs to pressurize system for start up. What do you mean wrong actuator? Quote Share this post Link to post Share on other sites More sharing options...
deonss Report post Posted October 20, 2011 If actuator: Google = 086325059REBUILD Quote Share this post Link to post Share on other sites More sharing options...
Gallardonera Report post Posted November 14, 2011 If actuator: Google = 086325059REBUILD thank you so mush for your help. If i understand : rebuild actuator = my actuator + 2600$ Quote Share this post Link to post Share on other sites More sharing options...
deonss Report post Posted November 14, 2011 thank you so mush for your help. If i understand : rebuild actuator = my actuator + 2600$ Quite right. Quote Share this post Link to post Share on other sites More sharing options...
Gallardonera Report post Posted November 16, 2011 Quite right. Ok , but a rebuild actuator is so strong than a new one Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.