mambo-lambo
LP Member-
Posts
68 -
Joined
-
Last visited
Profile Information
-
Gender
Male
-
Location
Prague
-
Mine always comes on when it is hot. Same deal with my ferrari because I have straight pipes on both.
-
lp560 bearing definately fits on older Gallardos. Guy pm'd me who has done the job. So this is 100% now. As for the rest I would not buy anything until someone has tried it. Maybe you would like to try
-
I like it
-
Mine was done last week. It is not so bad. If you look at lamboweb how to change a muffler, it is almost as good as good because it explains how to take the main parts down to where the transmission is: http://www.lamboweb.com/Repairs_Section/Ga..._06_Muffler.htm There are a few more bolts and pipes to undo on the transmission housing but it comes out pretty easily. The clutch already comes balanced from the factory. There are 2 tipex lines on the clutch that line up with a line on the flywheel and that is about it. I think the bolts are tightened in sequence to 70nm. Then you put it all back together again. My TOB was not leaking so I did not replace it. The Lambo garage also says that. I still am waiting for that other guy in this thread to see if the lp560 bearing went OK.
-
Mine goes through 1 litre every 1000 miles.
-
Shot a new vid of my G over the weekend:
mambo-lambo replied to villains_lambo's topic in Archived Content
-
best money I ever spent. enjoy!
-
http://www.please check with our franchised lamborghini dealer sponsors.com/xq/asp/prid.2043.../qx/product.htm wrong one $3,082.52 is the lambo part 086141671D I have an 04 manual.
-
Also found this thread but no conclusive evidence as no one has tried the fekker yet. http://www.pistonheads.com/gassing/topic.a...or%20Gallardo???
-
07l105269f I got this clutch. It says e-gear on it but dealer says for manual and e-gear. So I guess it makes sense what you are saying that the bearings fit too. Just to verify the number on the audi bearing? If I need a new TO bearing tomorrow I doubt the local dealer will have it in stock so I might go to the audi shop instead. Could you also verify if someone has actually fitted one of these because I would not like to get her opened up again BTW, a bit of news on the clutch. When I opened up the box at my mechanics today, they asked me how much I pad for it, I told them 2000 euros. Shock, horror on their faces Then 1 of the guys who is from Germany said that I should have asked him first. The parts on the clutch assembly was some Germany company beginning with V. He said his friend works there and is going to get a price for the individual peices. Got a feeling it is going to be a few hundred euros Too late now for me but will be useful for you guys. Anyway limey, please get back to me about the bearing. If I can get an audi one that cheap I will change it too. Stayed tuned.
-
Spoke to dealer today and he said he would be suprised if you found something. They all slightly different. Any news yet?
-
Ok Just saw that What you waiting for in the confirmation? From the dealer or someone fitting it to see?
-
No post above. This is your first post on this thread.
-
Yep, I want to know too for sure. I think it does. http://myworld.ebay.co.uk/miura_parts This guy sells them, ask him