Glenn Weir
LP Member-
Posts
52 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Everything posted by Glenn Weir
-
I plan on doing a reverse brake bleed. Seems like a good system and will do from longest line first as suggested. This will push all old fluid to the master and I can keep extracting it from there to get new fluid into all the lines at the same time.
-
Is there a brake bleeding sequence for my 74 Urraco? I just put a new master cylinder on and need to do all 4 brakes
-
I have these 3 piece polished Gotti rims, rears are set on 295/40/16, car sits awsome and with the use of a http://www.lambopower.com/forum/style_imag...ch_add.pngwheel spacer did not have to hammer the inner wheel well.
-
Thanks guys...I am on my way to NAPA to find out availability and costs.
-
I am going to replace all the brake calipers on my 74 Urraco as the stopping sucks and I have leaks that are causing problems. I totally rebuilt the stock calipers 5 years ago and recal Joe Frazer offering the 630 BMW calipers as a match to replace the stock ones. SOOOO..what is the exact year and make that I need to get for rears and for fronts???
-
Got the cover in top notch shape! perfect as was said! and is a great tight fit on my 86 Jalpa! will get a photo on car and post for future reference. All around great deal between Lambo members! Cheers
-
Looks good for me......If $225.00 plus I pay the shipping.......I can do paypal....cedit card...mail cheque...deposit money into your account. All are ok with me. I would like to have it marked as used car cover when sent so duty takes it easy on me. If you want I can phone you to finish details...just fire email to [email protected]
-
1 more question....does it have the logo on the cover? And I am hoping it does not say Gallardo on the cover? Will $225.00 get er done?
-
OK I would do $200.00 and pay all shipping of course.
-
I have an 86 Jalpa without a wing and in the Old School thread asked what cover fits my car? As you could see I have been told a G car cover will fit great so long as it is a G cover with no wing. So that is the question....is your cover for a no wing Gallardo? If so I am in Canada and would need it shipped of course. Glenn
-
Thanks guys....i do not have a wing so a G cover it is!!!!! Now I will be looking to get one Thanks again Glenn
-
I want a good car cover for my 86 Jalpa and I recal seeing a post that said either the Murcielago or the Gallardo covers fit excellent. anyone recall the post and can verify wich one is the good fit?? Glenn
-
FS: Original Factory Gallardo SE Indoor Cover
Glenn Weir replied to nycgallardo1's topic in Classifieds
Do you still have the cover? is it Black with the logo on the front ? Glenn -
I am re painting my Urraco and looking for a pair of the Bertone side emblems. Also would like to get a new Jalpa 3.5 emblem for the back of my 86 Jalpa. Any one have these?? Glenn
-
I would sure take the sun visors if you are selling seperatly........also would you have a car cover??? Glenn
-
Am I correct that the bolt pattern on the Jalpa is the same as GM.... 5 x 120 ???? Looking for options for new wheels and also is the backspaceing 6.5 inches?? Glenn
-
Yes Mike it is ......had the cam lightly seize last year....tor down ....fixed...then other side cam had oil passage block...starve a lifter bucket...break the lifter bucket....replaced lifter bucket...reshimed...took cam out and cleaned ....flushed oil again...now running nice. Those stacks are custom machined from a guy in Germany...think it was about 400.00 and the best part is the nice stainless mesh on the tops...they are pressed on so will not come off. Glenn
-
Here is my Canadian Stebro it is louder and a deeper sound than the stock Ansa and at a Canadian $1,250.00 paid 2 years ago, I am pleased with it. Only wish I had fully mounted it before i did the ceramic coating then I would have adjusted the left side as it hangs lower than the right. Cheers Glenn
-
Just for fun I am adding a pic of my engine...I really enjoy showing it at local gatherings. Cheers Glenn
-
Hey Peter .... I can post a picture of my exhaust on this forum...This is a shot of the stebro with a aircraft aluminum ceramic coating. The only thing that bothers me is how the left side is lower than the right side...if I were to do it again I would have made that adjustment...as it was when the exhaust went to coating we missed the hight problem and when mounted it showed up. In all the Stebro is a great sound and is louder than the Ansa. Cheers Glenn
-
Latest Photos Of My 1983 Countach (Possibly for sale)
Glenn Weir replied to Porsche930's topic in Archived Content
What size are the rims and what make? I may be interested... Glenn -
Some time ago I saw pics of a black Jalpa that went through a transformation that had the car end up as a Maroon color with goldish wheels. The final pic. shows the car at a show behind the security ropes. Anyone know this car or more importantly the link that gets me on to the pages of the details and pics? Glenn
-
Thanks for the reply...I was just talking with Roy Cats and he has a set of Diablo rims & rubber that I have heard will fit the Jalpa. The backs are holding 275 rubber and when I told Roy that I heard the rims will fit but need modification he said that you " Ryhno" had put a set of this type on your Jalpa and they fit with no modifications....Can you confirm? The rims fit a 91 - 97 Diablo Glenn
-
Are you at all interested in selling the Rims? I have an 86 Jalpa that could use the extra look, mine is black with white interior. Glenn
-
Any news on the Compomotives?? Glenn