Skogens Baron

Anyone know if the Cylinder Head bolts have to be tightened after engine has been driven some after changing head gasket? Seems to be impossible with the engin in car.. In my car its allso no seal in the cyllinder liners.. just metal against metal.. is that right? cheers Daniel

I am searching for replasment struts.. Insert struts in the mcphearson? 90's vw corrado? How did that work out?? harder or softer suspention than original? cheers Daniel

I have had my urraco from 2001 untill present, and my advice is to buy the best car on the market.. The value is still pretty low, and you can get a great car for a good price.. I bought the car for aprox 16 000 euro in 2001 and had a major service and some problems with clutch and differential last year.. I spent about 10 000 euro on this.. with overhauled carbs and new fuelhoses, new exhaust and timingbelts, bearings. Now i have a blown headgasket, and the job will aproximately be around 2000 euros depending on changing valves to stainless or not.. And after that I still need work on the rear suspension.. So Its not about what you need to do, its about when to stop.. Urracos are really beautifull cars.. I am thinking of selling my car after the headhgasket job, but i really dont want to because they are a blast to drive.. I have a Ferrari Testarossa as well, but to be honest, i have mutch more fun driving my Urraco.. I still do have a problem as I have 5 vintage cars and dont want to sell any of them.. Its really 2 too mutch.. Cheers Daniel

Thank you! I'm in contact with him.. cheers Daniel

Thnks.. Do you have a username?

Hello.. I am going to change the head gasket on my urraco. and wondering if there is something i need to adjust the valves? In norway we call it Shims. To get the valves correct adjusted we have to add schims to get it in the correct position with the camshaft.. Do i need a shims set specially for urraco? thanks in advance sorry for my bad english. Daniel Skulstadberg

when i'm replacing the head gasket i might want to change some other oil seals on the car. Does anybody know where to find a complete set of gaskets? Head gaskets is the most important one. I allso have to know the torque of the bolts. soon it will shine like a beauty again best regards Daniel Skulstadberg

Found this youtube video from the old owner i boght the car from.. Really funny!!

someone run into me in Oslo.. Not a big dent but it has do be repainted and check the mounting of the front bumber. no dents in the bumper so i was lucky. A nother problem is no present tough.. The engine started to get hot and i had some white smoke. The next day when i tryed to start the engine it wouldnt turn.. It was water in two of the cylinders on the front row. A blown head gasket. Not exactly what i needed now after having major service last summer.. Not sure what happens right now! best regards Daniel

had same issues on my car with the fitting.. The original system have a different connector pipe. I had a dialog with stebro on it and they should make me a connector pipe, but they never did. Had to solve it my self. Not good!

Started her up for the first time this year in Norway after a long winter. This is what she sounded like She was grumpy at first but when i got her up and running i took this video. It may need some tuning of the carbs, but thats minor problems! I love these cars:

Kjøp min isteden

thank you guys!

Tricky.. The leather wrapping around the speedo and tachometre looks series 1 espada to me.. when you se the bonit and fenders it allso looks like a front engined car.. Very strange... espada series 1

Found this picture on a carforum in norway.. What is this? A espada with Marzal steeringwheel? Somethings different with the midconsole to isnt it?

Dear fellow enthusiasts I have a heating issue on my urraco and need to replace the thermostate.. Will this fit from any other car? someone know for sure? I belive the most expensive way is to order trough a lamborghini dealer.. Best regards Daniel Skulstadberg

Why god, why!?

Soundclip inside

Thank you guys for all the support

Jepp... The leather is painted.. looks awfull.. I went to see this car in sweeden before i bought mine.. it had original wheels and seats but in bad condition.. the car is originally red.. That price is a dream.. if he gets that mutch, I should get $20 000 more

The title speaks for it'self.. It's been quite expensive but totally worth it! The list of things thats been done is long: New timingbelts and bearings New clutch reparing differential problem overhauled carburettors new fuelhoses fitting new stebro stainless racing exhaust fixing some minor rust problems 4 new vredestein sprint classic tyres overhauled front calipres I will fix a soundclip of the exhaust soon.. it sounds great

So this car have a 180 bhp engine?

isn't this urraco cheap? it is a p300?

I would definately keep the original stuff.. some people will aprecciate that if your selling it

Congrats Mike! About time, it looks like a beatufull jalpa with a wonderfull colour!! Must be really worth the wait..