ttuser Report post Posted July 29, 2011 Very Nice... what headlights are they? And are the strip LED lights a good option? the headlights are starr hid's the LED is very useful if your offroad in the dark. I flash it on my back yard and it looks like daylight, lol Quote Share this post Link to post Share on other sites More sharing options...
ttuser Report post Posted July 29, 2011 Friggin sick! Maintainence costs are high though? with older models, i think yes. with the '06 's (duramax engine, allison transmission) not too bad Quote Share this post Link to post Share on other sites More sharing options...
Chipster Report post Posted July 30, 2011 I was told by someone to expect $6k a year in maintenance. But i'm thinking that's if you truly are offroading and using it. If one has been kept up, I can't imagine you'd drop that much coin driving less than 10k a year cruising around. Either way, still not too terrible. Quote Share this post Link to post Share on other sites More sharing options...
ttuser Report post Posted July 30, 2011 for the guy who asked about the differences in the alpha, from wikipedia: The "Alpha" was an extensively re-engineered H1 that was equipped with GM's Duramax Diesel and 5-speed Allison transmission. The previous version of the H1 with the 6.5L "Optimizer" turbo-diesel engine suffered from sluggish sales; lack of power was one of the reasons for customer resistance. In 2002, AM General CEO Jim Armour took the idea of repowering the H1 to Bob Lutz and the GM Luxury Vehicle committee. GM soon approved the use of their Duramax/Allison powertrain for the H1. This would support the continuation of the H1 as the grandparent of the Hummer portfolio; it would also allow AM General to give the truck a much needed dose of updating in terms of power, torque, refinement and the ability to meet 2004 heavy duty EPA emissions requirements. The update program commenced in late 2002 with production launch slated to be fall of 2004. The engineering team chose the engine variant out of the GMT560 truck (the C4500) because it packaged better into the H1 engine bay; however, 23 engine component changes were required and the team had to do a 2.0 in (51 mm) body lift to accommodate the taller engine and its turbo housing (a prior 0.5 in (13 mm) lift had been done for MY96 to accommodate the turbo on the 6.5L engine). The GMT560 engine calibration was used with minimal modification; engine output was 300 hp (220 kW) and 520 lb·ft (705 N·m) of torque. Due to the Duramax engine being equipped with cooled exhaust gas recirculation and an internal engine oil cooler, the team had to deal with a 40 percent heat rejection increase to engine coolant. However, they were unable to increase the size of the cooling pack between the air-lift brackets that protrude from the hood. This meant dramatically re-engineering the fan system by putting the fan directly under the coolpack and driving it through a special gearbox directly off the crankshaft damper pulley. Several other cooling system modifications were required to assist with cold starting from −30 °F (−34 °C). Other major modifications included the use of special high-strength steel in the chassis frame, a more powerful steering gear; quieter axle differentials, redesign of the geared hubs to use quieter helical gears, new induction, exhaust and electrical power systems; and re-engineering of the fuel supply and filtration system. Off road the much higher torque of the engine, combined with a lower gearing ratio (about 44.5 to 1 in low lock), made the truck much more powerful. The Duramax engine delivered more torque at lower engine speeds than the 6.5L, so the team actually had to calibrate the torque management to protect certain driveline parts. This new torque profile coupled with centralized tire inflation and AM General's new interior resulted in the complete re-engineering of everything except the carryover body made of aluminum beams and panels. Production launch was early in 2005, and continued until production ceased in mid-2006. All vehicles built during this time are classified as model year 2006 (10th digit in VIN is a 6.) The program was cancelled May 12, 2006 because GM decided to withdraw technical and financial support for future engineering and recertification. Quote Share this post Link to post Share on other sites More sharing options...
MattSunshyne Report post Posted August 13, 2011 here's a few pics of my '06 alpha nice color choice sir, well done. Donnie- look forward to your sauce update Quote Share this post Link to post Share on other sites More sharing options...
donnie Report post Posted August 14, 2011 Been moving house - so just RELOCATIONSAUCE and a hard hitting dose of UNPACKINGSAUCE. Wicked. Couldnt even get time for PHOTOSHOPSAUCE. Damn. Quote Share this post Link to post Share on other sites More sharing options...
Chipster Report post Posted August 14, 2011 Lol Quote Share this post Link to post Share on other sites More sharing options...
Lambo91 Report post Posted August 14, 2011 i thought it was an ADV.1 thread until I saw who started it. i love H1s..they look soo cool! Quote Share this post Link to post Share on other sites More sharing options...
kmr Report post Posted September 29, 2011 Donnie... dont think I saw anywhere but is your new one Gas or Diesel? Looking at a couple right now and are there certain years/engines to stay away from? It will be a 3rd car so not too worried about having the best (alpha.) How is the progress on yours coming? Quote Share this post Link to post Share on other sites More sharing options...
donnie Report post Posted September 29, 2011 Stay away from Gas. Theres not many around anyways. Progress of mine is slow. I may have the infamous number 8 cylinder problem - diagnosing that without stripping the engine is a waiting game. If it turns out I have that problem I will take the time to upgrade to new more modable engine. Im ordering a CalGold slant back top and to matt black the whole thing. Quote Share this post Link to post Share on other sites More sharing options...
kmr Report post Posted January 10, 2012 Stay away from Gas. Theres not many around anyways. Progress of mine is slow. I may have the infamous number 8 cylinder problem - diagnosing that without stripping the engine is a waiting game. If it turns out I have that problem I will take the time to upgrade to new more modable engine. Im ordering a CalGold slant back top and to matt black the whole thing. Donnie anymore updates on your H1? Im really in the market and trying to educate myself as much as possible. Quote Share this post Link to post Share on other sites More sharing options...
sonnythebull Report post Posted January 10, 2012 Who in toronto is doing the work Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.