beddu Report post Posted September 15, 2014 So guys, wanted to let you in on a project. As you know, renders of their proposed Huracan had long been produced on the interwebs, but whilst some components and ideas were already developed, they struggled to obtain a development vehicle. Until now.. At the discretion of the owner, a friend of mine, I will not reveal too many details, but I'll say that I've recently been appointed by Oakley Design as his Middle Eastern agent, and we will shortly, hopefully, be fully established. As I currently work at a Middle Eastern Lamborghini importer, there were some interesting quirks I learnt of and gave feedback to them which they'll provide interesting fixes for (anyone else have the front hydraulic wishbone bushes explode for example?). I will post updates as they come. For now, some baselines: Weight - 1422kg dry quoted by Lamborghini? Nah. This is with close to no petrol in the tank, and no driver. Dyno figures on a cloudy British day on a Mustang: And how it is now: Keep following, it's going to be special.. Quote Share this post Link to post Share on other sites More sharing options...
Buddilly Report post Posted September 15, 2014 Can't wait to see it! Quote Share this post Link to post Share on other sites More sharing options...
beddu Report post Posted September 17, 2014 Apparently some car paparazzi were on sight to video it Quote Share this post Link to post Share on other sites More sharing options...
beddu Report post Posted September 18, 2014 So. Ponder on that Quote Share this post Link to post Share on other sites More sharing options...
beddu Report post Posted September 18, 2014 Also admins, please let me know if i'm breaching any seller policies - I'm merely repeating Oakley Designs' development of their Huracan components, as they do their own direct marketing Quote Share this post Link to post Share on other sites More sharing options...
beddu Report post Posted September 21, 2014 So, following on.. Strip-down continuing unabated, down to the muffler. The previous picture showed the new Prototype Titanium muffler, weighing in at 12kg replete with titanium bi-modal valves. The stocker? 38KG. That's 26KG saving from the extreme rear of the vehicle. Interesting tidbit, the plastic rear diffuser? It clocks in at 18kg!! So, watch that space.. Quote Share this post Link to post Share on other sites More sharing options...
TRANSAMERA Report post Posted September 22, 2014 Great info in this thread! Quote Share this post Link to post Share on other sites More sharing options...
BLK Miles Report post Posted September 22, 2014 Looking forward to more updates and info Quote Share this post Link to post Share on other sites More sharing options...
RM-S8 Report post Posted September 22, 2014 So, following on.. Strip-down continuing unabated, down to the muffler. The previous picture showed the new Prototype Titanium muffler, weighing in at 12kg replete with titanium bi-modal valves. The stocker? 38KG. That's 26KG saving from the extreme rear of the vehicle. Interesting tidbit, the plastic rear diffuser? It clocks in at 18kg!! So, watch that space.. What the heck did they do to a perfectly good Huracan! I'm ready to cry... But, seriously, interesting thread. Huracan being put on Weight Watchers diet. Weight saving might be a huge benefit, if safety of removal of certain parts is being taken under consideration. Quote Share this post Link to post Share on other sites More sharing options...
HannibalACP82 Report post Posted September 23, 2014 Very cool thread! And stock exhausts always look so horrible. Quote Share this post Link to post Share on other sites More sharing options...
FikseSTS Report post Posted September 23, 2014 very low numbers from that Mustang dyno..... weight is as expected..... Quote Share this post Link to post Share on other sites More sharing options...
Kevin2772 Report post Posted September 23, 2014 very low numbers from that Mustang dyno..... weight is as expected..... I was thinking the same thing. Do you really think there is a 27% loss to the wheels? That seems REALLY high. Quote Share this post Link to post Share on other sites More sharing options...
beddu Report post Posted September 23, 2014 Keep in mind it's a very fresh engine - would've had less than 300mi when it was on the dyno. Using the Gallardo loss figures that figured about 585HP "crank" but Jon's waiting for more Huracan dyno figures to filter in, he didn't run the drag test to get wheel loss figure, what's jotted on paper are estimates. Do note though, the car was run those 300mi on crappy Saudi 95 Octane fuel that's equal parts dust:petrol, he had drained that and put in a quick splash of I think 98 Octane just for the dyno run - the car was literally offloaded from the plane from Saudi and straight to the dyno. Quick things he did note, muffler is almost identical to 2014 R8, front differential identical to Gallardo, and front hubs shared with Aventador (keep note of this one..) The weight was extremely surprising, but Oakley even found in past the Aventador Roadster to weigh in at 1746kg wet, instead of the quoted 1625kg dry from Lamborghini. Unless the car has a huge capacity for oil and coolant and whatnot.. This customer took the weight to heart, and there may be some interesting developments being carried out. I guess it is a shame to see the first customer car in Saudi (yep!) being straight away shipped out and stripped naked, but I guess it shows dedication. Keep in mind Oakley is a Pirelli test driver, so he's had experience of the car prior to launch and knows what to work on. Safety is paramount, he won't even reupholster airbag covers, or touch anything remotely related to sensitive wiring areas. However, he noticed the front crash beam was steel rather than aluminium as is typical.. Quote Share this post Link to post Share on other sites More sharing options...
beddu Report post Posted September 24, 2014 So, this happened about 20 minutes ago: Oh, and the muffler came out slightly lighter than planned! That's now 28.5kg weight saving from the exhaust alone, WITH bi-modal valves! Quote Share this post Link to post Share on other sites More sharing options...
RM-S8 Report post Posted September 24, 2014 That's now 28.5kg weight saving from the exhaust alone, WITH bi-modal valves! That is very impressive. Quote Share this post Link to post Share on other sites More sharing options...
beddu Report post Posted September 24, 2014 Quite - estimating 85kg weight saving at the end of the project, possibly more depending on some decisions Quote Share this post Link to post Share on other sites More sharing options...
beddu Report post Posted September 30, 2014 Before: And the after : Apologies for the heartache in seeing this. Can you guess what's happening? Note, there'll be some interesting measurements soon from this as well.. Also, these are in the process too: More soon Quote Share this post Link to post Share on other sites More sharing options...
Fortis Report post Posted September 30, 2014 Carbon fibre? Quote Share this post Link to post Share on other sites More sharing options...
HannibalACP82 Report post Posted September 30, 2014 Loving the in progress details! Keep it up. Quote Share this post Link to post Share on other sites More sharing options...
beddu Report post Posted September 30, 2014 Carbon fibre? *Cough* Plus they're getting some things weighed - as this car is the first, it's also getting some bespoke touches. Quick question - the glass engine bonnet and forged carbon engine bay panel set has been delayed until further notice for all our cars, how about stateside? I also saw this from their engine tuner's instagram page of the same car: Quote Share this post Link to post Share on other sites More sharing options...
beddu Report post Posted October 17, 2014 Pardon the lack of updates - it's been a bit manic, just got back from the UK where I spent some time with Oakley. Unfortunately not much interesting or available to show as everything is still a work in progress and some sensitive items, what I can send is this though: Yes, it's only a render, but this is what the customer is getting done for his specific car. For progress as a whole, pretty much ALL molds are now complete and ready to be laid with prepreg. Parts are also due to trickle in, and assembly will come together with some interesting developments too. All design is finished, and it'll look and perform pretty special.. Quote Share this post Link to post Share on other sites More sharing options...
beddu Report post Posted October 25, 2014 So, Anyone want to guess what that component is? Still needs finishing, but, suffice it to say some good weight savings from it A lot more to come, everything is starting to come together now! Quote Share this post Link to post Share on other sites More sharing options...
Villa21 Report post Posted October 25, 2014 This car is really going under the knife but it looks to be worth it! Quote Share this post Link to post Share on other sites More sharing options...
beddu Report post Posted October 26, 2014 He had the misfortune of being the development vehicle but he'll get extra one-off perks as rewards, like that component above Quote Share this post Link to post Share on other sites More sharing options...
beddu Report post Posted October 28, 2014 Another prominent component done. Let's just say it's a bit more aesthetic in nature, and adds some weight. About 1kg This is such a tease even for me! Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.