Jump to content

Welcome to Lambo Power!

Thank you for stopping by LamboPower.com. We are proud to announce our relaunch and redesign in 2019.

If you haven't already registered for a free account, take just a second and create an account today.

Welcome to the bullpen. 



Lambo Owner
  • Posts

  • Joined

  • Last visited

Everything posted by tomlang89

  1. Just my 2 cents on sourcing this, I recently purchased my TOB from eurospares, bought it in GBP due to the woeful exchange rate and had it shipped to the US for free. Customs charged me $80 but i saved over $1,400 in total. Hi-Tech also make uprated TOB's if you wanted to go that route, and clutches.
  2. My murci is Blu Hera and I was looking at going with ADV1 rims in a flavor of Bronze... but I decided to keep the factory rims for now. I was steering towards the matte bronze (Ferrari, Black Huracan and the White Huracan
  3. They look great! also that door sticker.. I need one!
  4. I have my almost brand new Michelin Pilot Super Sport's for sale after replacing them with the Corsa's - where would you advise selling them, Viper form or just fleabay?
  5. I've had the clutch fluid changed and bled, there's not visible clutch fluid after the 2000 mile road trip and there's no free play in the clutch pedal with good travel. Next step i think is to use a borescope to see...
  6. Hi All, I just wanted to update you all as we got to the bottom of the shifting issue with Jason Giannetti of Giannetti Performance who I would highly recommend (377 Sheffield Ave, West Babylon, NY 11704 (631) 587-0268)! The main issue is that the clutch isn't fully disengaging which is causing issues shifting out of and into gears, especially at speed. There may be damage to the synchros and gears themselves but I am able to drive the car with no huge issues with this knowledge now (to get into reverse I'll stop the engine, shift then start the engine again). I'll be taking the engine out to have a new tried and tested kevlar clutch put in along with a potential transmission rebuild this winter. I don't know the make of the clutch unfortunately but apparently it's not the one UGR installed, time will tell. As for the shifter, for now we have tapped a hole in the existing shaft, put a 5mm screw in and then tapped a hole in a screw matching the thread pattern of the shifter for a quick fix until replaceing the shaft this winter when the engine is out to minimize labor costs (a few pics attached). If anyone's in the tri state area I really would recommend Jason, great pricing and an extremely knowledgeable guy! Thanks, Tom
  7. Yes it was great - 4 of us on the track, they didn't have the timing board set up in the end, coupled with my clutch disengagement issue I had to shift very slowly so really just booted her in 2nd and 3rd gear! Drive was about 1hr15 mins, Midway Motorsports is the place, great owner and the place has a huge amount of untapped potential...
  8. After 2,142 miles we've returned from NYC, no breakdowns and we didn't get pulled over once! A few pics of the track day are attached for your viewing pleasure. Cheers, Tom
  9. Stimpy - I spoke with a couple of people on this point and they mentioned this could be quite dangerous as this would most likely just heat up the flywheel and pressure plate creating hot spots which will result in chatter every time the clutch is let out as it's a kevlar clutch they don't burn easily?
  10. All I've been told is that it was changed after UGR did the build and we have no idea who changed it... if anyone knows the past owner and could help that would be great, if not it's an engine out job over winter to find out more... Interesting point contrary to the above is the tech I went to said he could see purple marks on each of the clutch bolts which apparently UGR do on their builds like their signature... so he thinks UGR did the clutch. Maybe what happened is the old owner got the UGR clutch rebuilt / re coated perhaps? Who the hell knows at this point... lol
  11. I know what i'm doing Tuesday at the drag strip then! I'll make sure to video this... Maybe I shouldn't have put a brand new set of tires on...
  12. Tell me more. I have been informed the best course of action is to replace the clutch with a tried and tested option. We have no idea who installed the current clutch / what brand it is etc.
  13. I haven't actually got it resolved just yet... long story but it's drivable and over winter i'm going to pull the engine, replace the clutch, replace various bits in the transmission upon inspection which will include gears 1-3, syncros bearings etc., new manual gear shaft, upgraded lift system to LP640 and a few other bits to get the transmission working 100% The clutch issue seems to be that the plates are too thick and they basically don't completely disengage.. still investigating. If you're about and want to join the drive Thursday the 27th or the 4th let me know!
  14. This is very true... I'll investigate. Appreciate it, very much looking forward to the drive! The double sided 3M tape is a good shout i'll order some now thanks!
  15. Haha I know what you mean.... after 2 parking tickets in NYC for not having a front number plate I gave in and got the tow eye bracket... I'll be taking it off for the road trip though! The colour is Blu Scuro I believe.
  16. I had a problem where sometimes the windows would work and sometimes they wouldn't, the problem was a faulty window ECU...
  17. Hi Everyone, I'll be travelling from NYC to Savannah GA and back with a friend starting next Wednesday evening for just over a week, if anyone has any road trip advice / would like to sync up and cruise for a few miles let me know! The Itinerary is below and we have a 1/2 mile drag strip booked all day on Tuesday the 2nd of May in Charleston SC, PM me if you'd like to come by! Wednesday 26th April - Leave NYC to AC Thursday 27th April - AC - DC Friday 28th April DC - Wilmington / Myrtle beach Saturday 29th April - Wilmington / Myrtle beach Sunday 30th April - Wilmington / Myrtle beach Monday 1st May - Wilmington - Charleston Tuesday 2nd May - Charleston Track day Wednesday 3rd May - Charleston - Savannah Thursday 4th May - Savannah - Richmond Friday 5th May - Richmond - NYC I leave you with a few pics from the first Manhattan Cars and Coffee event on April 9th
  18. FYI everyone my Pzero Corsa's which i've had on order from tire rack for 2 months were just delivered today, they seem to be back in stock for what I imagine to be a very short time...
  19. Happy to fill you in with my 12 months of ownership of my UGR 2003 Murci, shoot away with specific questions or drop me a PM and we can talk over the phone which may be easier.... Tom
  20. Just purchased this beast today, a 1986 Landrover Defender 6x6 fire engine. She will be my next project, lots of ideas so far on a rebuild and modifications! One thing's for sure this will be the tow vehicle for my murci when she's up and running for events!
  • Create New...