Lambofan35 Report post Posted May 5, 2018 Whats everyones thoughts of this piece? It says all carbon fiber even though it shows fiberglass in this version. https://www.ebay.com/itm/Carbon-Fiber-Perfo...hTi&vxp=mtr I was thinking to make some stronger support brackets under the rear panel but other than that, it is exactly what I was thinking. To do the OEM huracan performante spoiler it will be over $50K for the hatch, glass, rear upper frame, rear panel where emblem ($6000 alone), spoiler, etc.. They priced it this high on purpose so no one would do it to a regular huracan with OEM Lamborghini parts. Quote Share this post Link to post Share on other sites More sharing options...
joetwint Report post Posted May 5, 2018 Whats everyones thoughts of this piece? It says all carbon fiber even though it shows fiberglass in this version. https://www.ebay.com/itm/Carbon-Fiber-Perfo...hTi&vxp=mtr I was thinking to make some stronger support brackets under the rear panel but other than that, it is exactly what I was thinking. To do the OEM huracan performante spoiler it will be over $50K for the hatch, glass, rear upper frame, rear panel where emblem ($6000 alone), spoiler, etc.. They priced it this high on purpose so no one would do it to a regular huracan with OEM Lamborghini parts. I think the regular huracan looks better without the wing jmho. Also wouldnt trust its gonna hold up to the speeds your car is capable of.And i bet there will be fitment issues.I wouldnt do it. Quote Share this post Link to post Share on other sites More sharing options...
Lambofan35 Report post Posted May 5, 2018 I think the regular huracan looks better without the wing jmho. Also wouldnt trust its gonna hold up to the speeds your car is capable of.And i bet there will be fitment issues.I wouldnt do it. I agree on the both points. It would have to have some reinforcement brackets I would need to fabricate. In terms of the fitment, I have to say it will require some sanding for sure and then I would have to hope it would fit decent. You never know in my experience except to bet it won't fit out of the box. Quote Share this post Link to post Share on other sites More sharing options...
SV-N-IT Report post Posted May 6, 2018 something looks off IMO looks great the way it is! Quote Share this post Link to post Share on other sites More sharing options...
DarrinB Report post Posted May 6, 2018 I agree with everyone else. I would not bother with it. Quote Share this post Link to post Share on other sites More sharing options...
VCR Report post Posted May 6, 2018 Doesn't look that well engineered. Seems like plenty of extra work to ensure its stability. Do you really want to buy a CF product without any reference on how the weave looks IRL? Also agree that the car is fine exactly as is. Quote Share this post Link to post Share on other sites More sharing options...
Fortis Report post Posted May 6, 2018 It seems that it stands higher than the Performante wing, possibly that’s what makes it look a bit odd. The first thing I think when I look at an aftermarket wing is air break! I doubt any of the manufacturers do any aero testing. Quote Share this post Link to post Share on other sites More sharing options...
fabo Report post Posted May 7, 2018 I always though that the regular Huracan does not need a wing. Its beautiful just the way it is. Its similar to Ferrari's, it ruins the look of them I wouldn't do it..... Quote Share this post Link to post Share on other sites More sharing options...
Smurf Balls Report post Posted May 7, 2018 something looks off IMO looks great the way it is! Quote Share this post Link to post Share on other sites More sharing options...
Lambofan35 Report post Posted May 7, 2018 Wow lots of Dont bother responses. It wouldn’t be anything non reverseable that’s for sure. I’m betting its the same height as the perf wing but maybe not. I’m going to ask for measurements. Quote Share this post Link to post Share on other sites More sharing options...
Kevin2772 Report post Posted May 7, 2018 Hasn't UGR put a similar wing on a few of their cars? I didn't think it looked bad in those pics, which wing did they use? Quote Share this post Link to post Share on other sites More sharing options...
Phteven Report post Posted May 7, 2018 Hasn't UGR put a similar wing on a few of their cars? I didn't think it looked bad in those pics, which wing did they use? I believe they said it was OEM Perf wing, which is incredibly involved (Hatch, etc) Quote Share this post Link to post Share on other sites More sharing options...
CHADW Report post Posted May 7, 2018 Wow lots of Dont bother responses. It wouldn’t be anything non reverseable that’s for sure. I’m betting its the same height as the perf wing but maybe not. I’m going to ask for measurements. IMVHO, if the majority of Lambo guys say it’s too much, it’s definitely too much. Quote Share this post Link to post Share on other sites More sharing options...
Cabbe Report post Posted May 7, 2018 Unless you're from Japan. Then you need 16 more wings, neonlights and a leopard paint job. Quote Share this post Link to post Share on other sites More sharing options...
VCR Report post Posted May 7, 2018 Unless you're from in Japan. Then you need 16 more wings, neonlights and a leopard paint job. Fixed it for you. Quote Share this post Link to post Share on other sites More sharing options...
Lambofan35 Report post Posted May 7, 2018 Can one of the PERFORMANTE owners do me a favor and measure the height off the edge of the center, front of the spoiler? And the overall width of the OEM wing? Quote Share this post Link to post Share on other sites More sharing options...
joetwint Report post Posted May 7, 2018 Can one of the PERFORMANTE owners do me a favor and measure the height off the edge of the center, front of the spoiler? And the overall width of the OEM wing? Yes height = 8 “ and width = 60 5/8 front tip to tip Quote Share this post Link to post Share on other sites More sharing options...
joetwint Report post Posted May 7, 2018 Yes height = 8 “ and width = 60 5/8 front tip to tip After looking at the aftermarket and oem the difference is in the size and angle of the struts .Oem struts are much wider at the base. Quote Share this post Link to post Share on other sites More sharing options...
05LSV Report post Posted May 7, 2018 RSC has a nice "Performante-esque" carbon fiber wing they just released... Quote Share this post Link to post Share on other sites More sharing options...
Lambofan35 Report post Posted May 8, 2018 RSC has a nice "Performante-esque" carbon fiber wing they just released... I’ve seen that one installed in person and it literally broke at I think 150-190mph at the oem rear base according to the driver of the car. Really a nice wing and broken symmetrically under both bases. It might not have been reinforced properly as say vorsteiner normally offers with there spoilers with some carbon supports hidden under the base. I actually have a low mount rsc lip spoiler now which is nice quality. I’ve asked rsc on another forum I believe about there tall performante style wing if they have fixed the problem and they never sent me any updates except to email them. They also wanted like $5k for the wing I saw fail in person so I didn’t bother to follow up anymore. The eBay one I posted has similar measurements but it might be a little bigger. The eBay one says about 64” wide and q0” tall BUT the height measurement isn’t precise as the oem performante was measured in front and no idea where eBay guy did it at. Thanks for getting the measurements. Quote Share this post Link to post Share on other sites More sharing options...
SV-N-IT Report post Posted May 8, 2018 I’ve seen that one installed in person and it literally broke at I think 150-190mph at the oem rear base according to the driver of the car. Really a nice wing and broken symmetrically under both bases. It might not have been reinforced properly as say vorsteiner normally offers with there spoilers with some carbon supports hidden under the base. I actually have a low mount rsc lip spoiler now which is nice quality. I’ve asked rsc on another forum I believe about there tall performante style wing if they have fixed the problem and they never sent me any updates except to email them. They also wanted like $5k for the wing I saw fail in person so I didn’t bother to follow up anymore. The eBay one I posted has similar measurements but it might be a little bigger. The eBay one says about 64” wide and q0” tall BUT the height measurement isn’t precise as the oem performante was measured in front and no idea where eBay guy did it at. Thanks for getting the measurements. Jim with the gray H also had his aftermarket wing crack the deck lid after hitting 140-150mph which should never happen with any wing.. Quote Share this post Link to post Share on other sites More sharing options...
Allan-Herbie Report post Posted May 9, 2018 Nope Quote Share this post Link to post Share on other sites More sharing options...
05LSV Report post Posted May 9, 2018 That sucks about the RSC wing. I have a 1016 Industries wing on my H and the wing uprights are bolted to the frame of the car. No issues with high speeds and my driving is “ spirited” to say the least. It doesn’t look like the Perf wing however, so it might not suit you. Quote Share this post Link to post Share on other sites More sharing options...
joetwint Report post Posted May 9, 2018 1016 wing That sucks about the RSC wing. I have a 1016 Industries wing on my H and the wing uprights are bolted to the frame of the car. No issues with high speeds and my driving is “ spirited” to say the least. It doesn’t look like the Perf wing however, so it might not suit you. That one had problems also Quote Share this post Link to post Share on other sites More sharing options...
05LSV Report post Posted May 15, 2018 Wow that’s too bad. The owner of that company wind tunnel tested the wing, so I’m surprised that happened. Maybe the wind tunnel doesn’t go up to 230mph... Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.