Underground Racing Report post Posted July 17, 2009 You are a horrible influence! HAHA! Quote Share this post Link to post Share on other sites More sharing options...
peakcompletions Report post Posted August 1, 2009 CONGRATS on a beautiful looking build and impressive numbers!!! Sounds like you are having a blast with the car which is what this is all about!! Quote Share this post Link to post Share on other sites More sharing options...
RedGTS Report post Posted August 2, 2009 CONGRATS on a beautiful looking build and impressive numbers!!! Sounds like you are having a blast with the car which is what this is all about!! Thanks Ray! BTW the decklid turned out great--still can't believe how incompetent UPS is though. Wish I lived closer to you as I'd love to see your Murci! Quote Share this post Link to post Share on other sites More sharing options...
peakcompletions Report post Posted August 2, 2009 i will have to dig up the pics of my paintings being delivered by UPS... 2 x 4 sides, with 3/4in plywood with two original oil paintings inside... looked like Texas chainsaw massacre!! I could see both paintings without opening the crate LOL goes to show no matter what you do someone is able to fcuk it up HAHA glad it worked out in the end. Quote Share this post Link to post Share on other sites More sharing options...
supergallardo Report post Posted December 16, 2009 My goal was 600+ rwhp on pump gas, which was achieved on the first pull at 4 psi, but look at the next two pulls (boost levels in upper left corner): More details a little later when I get some more time. Great results man!! Why not keep it at a 6psi daily on pump gas it should yeild 700+-whp. Quote Share this post Link to post Share on other sites More sharing options...
RedGTS Report post Posted December 19, 2009 Great results man!! Why not keep it at a 6psi daily on pump gas it should yeild 700+-whp. I'm sure it would probably be fine on pump gas at 6 psi, but given that I can get 110 out of the pump a couple of miles from my house I'd rather play it safe with anything over 4 psi. Quote Share this post Link to post Share on other sites More sharing options...
kilo16 Report post Posted December 19, 2009 Silly question but ... You think UGR/Heff/DLM would tune a car for me if I built a turbo setup independently? Quote Share this post Link to post Share on other sites More sharing options...
Allan-Herbie Report post Posted December 20, 2009 Silly question but ... You think UGR/Heff/DLM would tune a car for me if I built a turbo setup independently? I think you answered that question yourself.. Quote Share this post Link to post Share on other sites More sharing options...
Matador74 Report post Posted December 24, 2009 So how does an n/a gallardo put down between 360-450awhp, put down 900+( at least 2x) with only 10psi of boost. It usually takes over 2x atmospheric pressure( 15+psi) to do that. Has anyone tried outsourced dyno shops? I am not doubting these cars are fast, but I just think there is a lot of bullshit on these forums. Quote Share this post Link to post Share on other sites More sharing options...
jhanso Report post Posted December 24, 2009 So how does an n/a gallardo put down between 360-450awhp, put down 900+( at least 2x) with only 10psi of boost. It usually takes over 2x atmospheric pressure( 15+psi) to do that. Has anyone tried outsourced dyno shops? I am not doubting these cars are fast, but I just think there is a lot of bullshit on these forums. i think you misunderstand how a turbo works. 10 psi from the turbo on the left will be way different than 10psi on the right. plus when you factor in these are very well put together system (turbo sized optimum for application) you see these types of result. although i would agree still, those are huge jumps in power from 4psi up to 10. Quote Share this post Link to post Share on other sites More sharing options...
Allan-Herbie Report post Posted December 24, 2009 So how does an n/a gallardo put down between 360-450awhp, put down 900+( at least 2x) with only 10psi of boost. It usually takes over 2x atmospheric pressure( 15+psi) to do that. Has anyone tried outsourced dyno shops? I am not doubting these cars are fast, but I just think there is a lot of bullshit on these forums. My car has been dynoed on 2 different dynoes, one rear wheel hp, one 4 wheel... on 100 @ Jason Heffners it made 1063rwhp.... on 100 @ Sp Engineering's 4 wheel dyno it made 972awhp and 818 ft lbs of torque to all 4 wheels. Alexs 4 wheel dyno is said to read low too when for example Murcielago Lp640's dyno 460awhp.. while at other places they are known to dyno 515awhp. I know Mr Vrooms car when it dynoed 700rwhp on Jason heffners dyno, dynoed 50rwhp more on Car And Drivers.. Quote Share this post Link to post Share on other sites More sharing options...
RedGTS Report post Posted December 24, 2009 So how does an n/a gallardo put down between 360-450awhp, put down 900+( at least 2x) with only 10psi of boost. It usually takes over 2x atmospheric pressure( 15+psi) to do that. Has anyone tried outsourced dyno shops? I am not doubting these cars are fast, but I just think there is a lot of bullshit on these forums. Compression has a lot to do with the numbers on a stock block. It takes very little boost to make gobs of power at 11:1 CR. But there is a reason tuners lower the compression when they build a motor for boost as well, i.e., at higher power levels it's much safer to run higher boost on a built, lower compression engine than to run lower boost on a stock, higher compression engine, especially on pump gas. That's why I don't run around at 8 or 10 psi very much, and never on pump gas. So those numbers are real (or at least real on that dyno on that day--obviously there is always dyno variability), but if I wanted to make 900+ rwhp every time I was in the car I would send it back for a built engine and make it with higher boost/lower compression. Quote Share this post Link to post Share on other sites More sharing options...
Matador74 Report post Posted December 24, 2009 i think you misunderstand how a turbo works. 10 psi from the turbo on the left will be way different than 10psi on the right. plus when you factor in these are very well put together system (turbo sized optimum for application) you see these types of result. although i would agree still, those are huge jumps in power from 4psi up to 10. Its called Mass Air Flow. I know how turbos work I missed the part where these 10psi runs were on race gas, that explains the huge leap in power. Quote Share this post Link to post Share on other sites More sharing options...
hi0npsi Report post Posted December 24, 2009 I'm not familiar with the fuel system upgrades that go into the TT kits, but is there enough pump and injector available (20-25% more) to allow you guys to run E85 or E98? Second, is E85 available at the pump anywhere nearby? From my experience it has the knock suppression capacity of 110 or better, burns cleaner and is available at the pump here in the NW usually for less than 92 octane. I understand that leaded fuel is more mainstream and available anywhere in drums, but ethanol is an awesome option! Tom Quote Share this post Link to post Share on other sites More sharing options...
Zmydust Report post Posted January 7, 2010 Its called Mass Air Flow. I know how turbos work I missed the part where these 10psi runs were on race gas, that explains the huge leap in power. No it doesn't . Race gas makes no more power than pump gas at the same boost level, it only allows higher boost to be run without detonating. So it does appear you don't completely " know how turbos work " . The only fuels that you would see a power gain from are oxygenated (mrx01, u4, etc.). The higher gains per pound of boost you are seeing are due to the fact that boost pressure is a measure of restriction in the engine. The more effecient the engine in cycling air through it, the higher HP per pound of boost you will see. Quote Share this post Link to post Share on other sites More sharing options...
Scotty Report post Posted January 7, 2010 I guess the question is, are we both sane, or both insane? In a totally insane society........only the sane appear insane. Quote Share this post Link to post Share on other sites More sharing options...
RedGTS Report post Posted January 7, 2010 No it doesn't . Race gas makes no more power than pump gas at the same boost level, it only allows higher boost to be run without detonating. So it does appear you don't completely " know how turbos work " . The only fuels that you would see a power gain from are oxygenated (mrx01, u4, etc.). The higher gains per pound of boost you are seeing are due to the fact that boost pressure is a measure of restriction in the engine. The more effecient the engine in cycling air through it, the higher HP per pound of boost you will see. I wasn't going to beat a dead horse but you are exactly right. Since the boost numbers were already known and there was no change in the tune, the race gas really has nothing to do with the power numbers (but does make things safer at the higher boost levels). In fact, the pump gas run is making more hp per psi than the race gas runs. As I said, the compression is what makes the power numbers higher than one would expect for such low boost levels. Quote Share this post Link to post Share on other sites More sharing options...
RedGTS Report post Posted January 7, 2010 In a totally insane society........only the sane appear insane. I'm gonna try that one on my wife. Quote Share this post Link to post Share on other sites More sharing options...
pockmark Report post Posted January 7, 2010 Compression has a lot to do with the numbers on a stock block. It takes very little boost to make gobs of power at 11:1 CR. But there is a reason tuners lower the compression when they build a motor for boost as well, i.e., at higher power levels it's much safer to run higher boost on a built, lower compression engine than to run lower boost on a stock, higher compression engine, especially on pump gas. That's why I don't run around at 8 or 10 psi very much, and never on pump gas. So those numbers are real (or at least real on that dyno on that day--obviously there is always dyno variability), but if I wanted to make 900+ rwhp every time I was in the car I would send it back for a built engine and make it with higher boost/lower compression. I believe it also has quite a bit to do with the amount of timing used, Air/Fuel ratios, etc. The safer kit will typically make less power due to the tune on a stock motor/built motor. The more aggressive the tune, the more power it will make. Also, due to the fact that the Heffner/UGR cars have the ability to change out the ice, they can make more power on the dyno/quarter mile/etc. In all reality, other than the aggresiveness of the tune/efficiency of the kit (turbos,fuel system, etc.) /adding ice, all 3 tuners bolt on kit should make roughly the same power. IMO, putting up big numbers on the dyno is definitely cool, but what I would like to know is during real world driving/racing, what all these cars are really putting down. Obviously not because I could afford any of them right now, but just out of curiosity. I believe Red is also right regarding numbers on a stock block. Theorhetically, a stock block G should make more power at the lower end of the boost spectrum. The only varience is the safety of running higher boost. You wouldn't want to put 30lbs through a stock motor unless you like seeing what happends when pistons go through your firewall. On a built motor, it can be done and then some more boost. Quote Share this post Link to post Share on other sites More sharing options...
Scotty Report post Posted January 7, 2010 Quote Share this post Link to post Share on other sites More sharing options...
Zerski Report post Posted January 9, 2010 I'm not familiar with the fuel system upgrades that go into the TT kits, but is there enough pump and injector available (20-25% more) to allow you guys to run E85 or E98? Second, is E85 available at the pump anywhere nearby? From my experience it has the knock suppression capacity of 110 or better, burns cleaner and is available at the pump here in the NW usually for less than 92 octane. I understand that leaded fuel is more mainstream and available anywhere in drums, but ethanol is an awesome option! Tom That is a question I have as well. With cars like Supras, for example, putting down big numbers on E85 pump, could this be a viable option for Lambos as well? Quote Share this post Link to post Share on other sites More sharing options...
Zmydust Report post Posted January 9, 2010 That is a question I have as well. With cars like Supras, for example, putting down big numbers on E85 pump, could this be a viable option for Lambos as well? Yes , its an option. Just requires a BIG pump , BIG injectors, and fuel lines that the E85 won't destroy. And of course a tune for it. Quote Share this post Link to post Share on other sites More sharing options...
oufan2929 Report post Posted March 4, 2010 So in the last 8 months, how has your lambo held together on the stock motor? And how hard do you drive it? Quote Share this post Link to post Share on other sites More sharing options...
FikseSTS Report post Posted March 4, 2010 would the G need a new gas tank as well? Yes , its an option. Just requires a BIG pump , BIG injectors, and fuel lines that the E85 won't destroy. And of course a tune for it. Quote Share this post Link to post Share on other sites More sharing options...
pockmark Report post Posted March 4, 2010 Yes , its an option. Just requires a BIG pump , BIG injectors, and fuel lines that the E85 won't destroy. And of course a tune for it. I believe the TT Lambos have all of those already. Not sure on the fuel lines though. Quote Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.